5
1.1 General Safety
This service manual is intended for qualied service and maintenance personnel. Further information to the operation
of the device can be found the Operator's and Conguration Manuals.
The following rules are for your general safety
• Keep the area during and after maintenance operations clean.
• Work safety conscientious.
• Keep dismounted parts secure during maintenance operations.
• Avoid tripping hazards.
N
Danger!
Double-pole or neutral conductor safety.
Danger!
Danger of electrocution wenn stronger currents are used by connected metallic parts.
Do not wear clothing with metal.
Do not wear jewelry.
Do not wear glasses with a metal frame.
Warning!
Loose clothing can get caught in rotating parts of the device and can lead to injury.
When operating the device avoid wearing clothing that can get caught in rotating parts.
1.2 Safety Markings
Warning!
Waring of injury due to missing or damaged safety markings.
After maintenance operations reapply all protective parts, markings, covers, grounding cables, etc.
Replace all defective or damaged parts.
Wear safety goggles when:
• knocking in or out pins or similar parts with a hammer
• using spring hooks
• installing or removing springs, safety rings gripping rings
• using abrasive, cleaners, solution or other chemicals
1 Introduction
To Next Page
Loading...
Need help?
General
