EN
17
Owner’s manual
1.
2. Insert 2x AAA batteries with correct polarization (+/-).
3. Close the battery compartment.
Notes:
Do not mix the batteries.
Remove the batteries if the remote control is not going to be used for an extended
period of time.
Do not place the remote control under the direct sunlight or near sources of excessive
heat.
Point the remote control to the unit no more than 8 meters from the remote control
sensor and within 30° horizontally and 30° vertically of the front of the unit.
1. Press MENU button to enter main menu screen.
2. Use navigation buttons on the remote control to navigate the menu and adjust the settings.
3. Press MENU button to return to the previous menu or press EXIT button to quit the menu screen.
Program edit: input the password (000000 or 888888) to enter
the editing menu. This menu enables you to edit program lists by
locking, deleting, skipping, moving programs and creating favorite
programs list.
Move: Select a program and press red button on the remote
control, the program will be marked with an icon. Select new
be moved to the selected position.
Skip: Select a program and press green button on the remote
program will be skipped when you switch programs.
To Next Page
Loading...