Cabrinha 1X - Security Pin

16
2018 CONTROL SYSTEM USER MANUAL
CAUTION: Be advised that when the Security
Pin is engaged, you have a semi-permanent
connection to the kite. As a precaution, know
where your Quick Release Handle is and
be educated on how to activate it before
engaging the Security Pin.
FIG 1
FIG 2
FIG 3
SECURITY PIN
The harness loop is the rider’s primary connection
to the depower system, as long as it is equipped
with a security pin. This security pin is active only
when the rider is hooked into the harness loop.
Therefore, it is important that a secure connec-
tion is made between the Harness Hook and the
Harness Loop. This critical connection allows
you to depower the kite, spin your bar freely, and
re-launch your kite easily, all while still being con-
nected to your kite.
• We suggest that you engage the Security Pin
only when ready to launch and/or the Bypass
Leash is connected.
SECURITY PIN – ENGAGING
• Double check that your QR and control system
are set up properly.
• Hook into your harness loop.
• Once hooked into the harness loop, only
engage the Security Pin once you are ready to
launch.
• Insert the Security Pin into the center of the
harness hook, making sure it is below the
harness loop. Your harness loop must be
between the harness hook and the Security
Pin in order for this feature to work properly.
(FIG 1 & 2)
• Make sure that the Security Pin is secure. This
will keep your harness loop from accidentally
dropping out of your harness hook.Your Secu-
rity Pin is now ready for use.
SECURITY PIN – RELEASING
With your hands, slide the Security Pin out of the
harness hook. (FIG 3)
OPERATION