Cabrinha 1X - Bypass Leash

To Next Page

To Previous Page

2018 CONTROL SYSTEM USER MANUAL

BYPASS™ LEASH

The Bypass Leash QR also acts as a QR2, which after deployment of the QR1 activation of

the QR2 will completely separate the rider from the Kite.

Connecting the Bypass™ Leash

• The Carabiner end of the Bypass Leash must at all times, be attached to the Leash Con-

nection Ring, that is attached to the bottom of the 1x Landing Line. (FIG 2)

CAUTION:

To disconnect yourself from the Bypass leash you must activate the QR at the end of the

leash by pushing the QR away from your body (FIG 3-5).

Disconnecting from your kite may cause

your kite to blow downwind unaccompanied.

Avoid at all costs, disconnecting in a situation

where your loose kite may endanger others.

Disconnecting from your kite at sea may

also mean the possibility of not being able to

retrieve your kite. Use extreme caution and

judgement when disconnecting from your

kite. Familiarize yourself with the operation

of the QR and all security systems prior to

using this equipment.

FIG 1

FIG 2

FIG 3 FIG 4

FIG 5

OPERATION