FIREBALL
AUTOLOCK™
The Fireball is the riders primary connection to the
depower system, as long as it is connected to the
Fireball Harness. It is important that a secure con-
nection is made between the Fireball Harness and
the Fireball. This critical connection allows you to
depower the kite, spin your bar freely and re-launch
your kite easily.
We suggest that you engage the Fireball Autolock™
only when ready to launch and/or the Bypass Leash
is connected.
FIREBALL AUTOLOCK™ ENGAGING.
• Double check that your QR and control system are
set up correctly.
• Pull the Autolock™ outwards so that it sits on the
Socket Bar. (fig 1)
• Hook the Fireball into the Fireball Spreader Socket.
(fig 2)
• Once sitting in the Socket push the Autolock
upwards so that it auto-engages (fig 3).
• Make sure that the Fireball Gate is secure, and that
the Fireball is free to move around in the socket. (fig
4)
FIREBALL GATE - RELEASING
With your fingers either pull the Autolock™ outwards
and downwards so that it sits on the Socket Bar.
CAUTION: Be advised that when the Fireball
Autolock™ is engaged , you have a semi-
permanent connection to the kite. As a
precaution, know where your Quick Release
Handle is and be educated on how to activate
it prior to engaging the Fireball Gate.
OPERATION
FIG 1
FIG 2
FIG 3
FIG 4
To Next Page
Loading...