8
DEFAULT VALUES OF INDOOR UNITS
Table 2—Default Values of Indoor Units
Description
Remote
Code
High Wall Cassette Ducted
Floor
Console
Auto-Start Function F1 ON ON ON ON
Heating Temperature Compensation F2 2C 6C 6C 0C
Anti-Cold Air Function F3 NORMAL NORMAL NORMAL NORMAL
Indoor Fan Motor Speed Control after Set Temperature is Reached F4 LOWEST SPEED SET SPEED SET SPEED SET SPEED
Louver Angle Memory Function F5 ON N/A N/A N/A
Heating Only or Cooling and Heating Setting F6 CH CH CH CH
Cooling Temperature Compensation F7 -2C -2C -2C -2C
Refrigerant Leakage Detection F8 ON ON ON ON
Cleaning Filter Reminder F9 OFF OFF OFF OFF
Filter Replacement Reminder E1 OFF OFF OFF OFF
Lowest Temperature Setting E2 17C 17C 17C 17C
Highest Temperature Setting E3 30C 30C 30C 30C
Special Anti-Cold Air Function Setting E4 N/A N/A N/A N/A
Priority Setting of Heating or Cooling (Multi-Zone Systems only) E5 H H H H
Network Address Setting E6 N/A N/A N/A N/A
Capacity Code Selection E7 N/A N/A N/A N/A
Twins Setting E8 N/A N/A N/A N/A
Static Pressure Setting E9 N/A N/A 0 N/A
To Next Page
Loading...