Infotainment System 71
.
If in a waypoint trip, the ETA,
travel time, and driving distance
are all shown relative to the final
destination.
.
The final ETA is shown taking
into consideration any time zone
crossings that the route has
traveled through.
.
Press the ETA information area
to switch between the estimated
arrival time, total driving time
resulting, and driving distance.
Turn List
Press on the next turn indicator
shown on the map to display the
turn list or waypoint list. The
Interaction Selector is minimized
automatically. Press
Q to reveal the
following options:
Destination
Press the Destination screen button
to add a waypoint or change the
destination while viewing the turn
list. When the Destination screen
button is pressed, the display shows
the Destination screens.
End Guidance
Press the End Guidance screen
button to suspend the current route
in the turn list. When the End
Guidance screen button is pressed,
the turn list is exited and the display
returns to the main map view.
Avoid Areas
Press the Avoid Areas screen
button to select the highway name
that is to be avoided. The system
shows a pop-up asking how many
miles or if the entire road should be
avoided.
Turn List
.
When under a waypoint trip,
press on the Turn List Interaction
Selector button to show the turn
list. When entering a turn list, the
next maneuver instruction is
spoken.
.
The turn list title is the name or
address of the destination. Press
on the information button next to
the name of the destination to
display the destination
information.
.
The turn list is sorted in order
with the next maneuver at the
top of the list and the
subsequent maneuvers listed
below it. The next maneuver is
always highlighted upon entry
into the Turn List to quickly show
what the next maneuver is.
To Next Page
Loading...
Need help?
General
