26 Infotainment System
To record selected tracks from
the disc:
1. Load a CD or press CD/AUX/
HDD until the Disc screen
displays.
2. Press
l SEEK, g SEEK,
or press CD/Disc Music Menu to
select a song for recording.
3. Press REC.
4. A confirmation displays.
5. Select the song name to record.
A progress bar displays.
Recording from a USB Device
to the Hard Drive
To copy all tracks from the USB
device:
1. Connect a USB device or press
CD/AUX/HDD until the disc
screen displays the USB screen.
2. Press REC.
3. A confirmation displays.
4. Select All Songs to copy all
tracks. A progress bar displays.
To record selected tracks:
1. Connect a USB device.
2. Press CD/AUX/HDD until the
disc screen displays the USB
screen.
3. Press
l SEEK, g SEEK,
or press the USB Music Menu to
select a song for recording.
4. Press REC.
5. A confirmation displays.
6. Select the song name to record.
A progress bar displays.
Duplicate Content
When the record function is started,
there is a check to verify that it does
not already exist on the hard drive.
If the entire content of the CD exists
on the hard drive, it will not record
the content.
If it is determined that some or none
of the content exists, then only that
content will be copied to the hard
drive.
If the same file is recorded from
USB and CD, it is possible to have
duplicate tracks.
CD Eject
If the CD ejects before the recording
process completes, only tracks that
have been completely recorded are
stored to the hard drive, incomplete
tracks are discarded.
Power Mode
If the system is turned off during a
CD or USB recording process, it
stops. When the radio is turned
back on, the recording process does
not resume automatically.
To Next Page
Loading...
Need help?
General
