Infotainment System 79
Dimming Mode
Auto (Automatic): Automatically
adjust the screen background
depending on exterior lighting
conditions.
Day: The map background
brightens.
Night: The map background
darkens.
To change the overall brightness
setting for the display, use the
vehicle interior lighting dimming
control.
Setting the Clock
To set the time:
1. Press CONFIG to enter the
config setup menu features.
Turn the MENU/SELECT knob
until the Time feature displays.
Press the MENU/SELECT knob
or press the Clock screen button
to display the other options.
2. Press the Hours and
Minutes – and + signs to
decrease and to increase
the time.
12/24 HR Format: Select the
12 HR screen button for standard
time; select the 24 HR screen
button for military time.
Day + or Day −: Press the day + or
day − display buttons to increase or
decrease the day.
Display: Press the Display screen
button to turn the display of the
clock on the screen on or off.
Global Positioning
System (GPS)
The position of the vehicle is
determined by using satellite
signals, various vehicle signals, and
map data.
At times, other interferences such
as the satellite condition, road
configuration, the condition of the
vehicle and/or other circumstances
can interfere with the navigation
system's ability to determine the
accurate position of the vehicle.
The GPS shows the current position
of the vehicle using signals sent by
the GPS Satellites of the United
States Department of Defense.
When the vehicle is not receiving
signals from the satellites, a symbol
appears on the map screen. See
Navigation Symbols on page 52.
This system might not be available
or interferences can occur if any of
the following is true:
.
Signals are obstructed by tall
buildings, trees, large trucks,
or a tunnel.
.
Objects are located on the rear
shelf of the vehicle.
.
Satellites are being repaired or
improved.
For more information if the GPS is
not functioning properly, see If the
system needs service and Problems
with Route Guidance.
To Next Page
Loading...
Need help?
General
