Infotainment System 99
2. Turn the MENU/SELECT knob,
then press it to select the
Bluetooth submenu.
3. Turn the MENU/SELECT knob,
then press it to select “Add New
Phone.” The pairing process will
begin searching for Bluetooth
devices on your cellular pone.
See the cell phone
manufacturer's user guide for
information on this process.
On the cell phone, locate the
device named “Your Vehicle.”
Follow the instructions given on
the cell phone or follow the voice
prompts, to enter the four-digit
Personal Identification Number
(PIN) that has been provided.
4. The system voice prompt
requests that you say the name
you want used for the phone that
is being paired. Use a name that
best describes the phone. The
system voice prompt then
repeats the name you provided
for confirmation: say “Yes.”
5. The system responds with
“phone name has been
successfully paired” after the
pairing process is complete.
Listing All Paired and Connected
Phones
1. Press CONFIG. Turn the MENU/
SELECT knob until the Phone
menu displays. Press the
MENU/SELECT knob to display
other phone options.
To Next Page
Loading...
Need help?
General
