Caffe Vergnano Tre Mini 660 - Operation, Energy Saving, and Cup Usage; Start-up and Warm-up; Energy-Saving Function; Adapting for Large and Small Cups

Start-up/Warm-up
• Insert the plug (9) into an outlet.
• Switch machine on using the main switch (4). (Fig.4)
• The coffee dispensing switch 3 blinking intermittently;
when the switches (4) and (3) remain lit without blinking,
the machine is ready for use.(Fig.5)
• While the machine is warming up (coffee dispensing
switch 3 blinking) it cannot deliver beverages.
22
Use of large cups
To use large cups, close the drip tray (6) by
pushing it inside the machine (Fig.6).
When the tray is pushed all the way in, place the large
cup under the outlet, directly on the flat surface (Fig.7).
Use of small cups
To use the machine with small cups, pull the drip tray
out (6) and place the cup on the grid (5) (Fig.8).
6
5
Fig. 4
4
Fig. 5
3
4
Fig. 6
Fig. 8
Fig. 7
6
Energy-saving function
If the machine is left on without being used, it will
shut down automatically.
To use the machine again press switch (4) and wait
for it to warm up: remains lit without blinking, the
machine is ready for use (Fig.5)