Cafi na ALPHA – 04/2006
32
16 Technical specifi cations and installation diagram
CAUTION
On the installation side, an all-pole separator
with contact-opening of 3 mm minimum per
pole must be provided.
• Maximum system impedance at mains
0.10 ohms. (You can enquire about impedance
from your power supplier.)
• Plug and socket for power supply
• External main switch for power supply
• Supply and main valve for water connection
•
Maximum water pressure 0.5 MPa (5 bar)
•
Maximum fl ow temperature of water: 20° C
Please ensure that these preparations have
been made or that this equipment is to hand by
the day when installation is to take place.
To Next Page
Loading...
