22
Filter Cycles 1 and 2 are the factory-programmed defaults. These may be satisfactory for your needs, but can be
customized if you wish. If you leave the Filter Cycles option untouched, you will still have Filter Cycles 1 and
2 working for you every day. Filter Cycles 3 and 4 can also be employed in addition to Filter Cycles 1 and 2 and
these Cycles allow full customization as well.
Filter Cycles 1, 2, 3 and 4 can all be adjusted in 15 minute increments. Use the MENU button to move from field
to field, use the UP and DOWN arrows to make adjustments and then press RETURN once you’re satisfied with
your selections for all Cycles. Please note that the system will not allow you to set overlapping or contradictory
Cycles.
To Next Page
Loading...
