ENTERING SQUARE & CUBIC
DIMENSIONS
Enter square & cubic dimensions* in this order:
(1) Numerical Value
(2) Convention — Square or Cubic
(3) Definition — Meters, Yards, Feet, Inches
Enter the following square and cubic dimensions:
Dimension Keystrokes
5 Cubic Yards 5 [Cu] [Yds]
130 Square Feet 130 [Sq] [Feet]
33 Square Meters 33 [Sq] [M]
LINEAR CONVERSIONS
Convert 14 (linear) feet to other linear dimensions:
Keystrokes Display Shows
14 [Feet] . . .
[Conv] [Feet] [Feet] 14 FT 0 IN
[Conv] [Inch] 168 IN
[Conv] [Yds] 4.666667 YDS
[Conv] [M] 4.267209 M
[Conv] [CM] 426.7209 CM
[Conv] [MM] 4267.209 MM
* A feet-inch dimension cannot be entered directly as a
square, since by definition it is a linear measurement.
However, the area or volume can be found through simple
multiplication. (See Area and Volume examples.)
14 — Construction Master III
®
To Next Page
Loading...
