Calculated Industries Construction Master III - Table of Contents

TABLE OF CONTENTS
Introduction...................................................... 3
Key Definitions.................................................. 4
Entering Dimensions........................................13
Entering Square and Cubic Dimensions........... 14
Linear Conversions.......................................... 14
Square and Cubic Conversions........................ 15
Mathematical Operations................................16
Adding Dimensions.......................................... 16
Subtracting Dimensions................................... 17
Multiplying Dimensions...................................17
Dividing Dimensions........................................17
Percentage Calculations...................................18
Memory Functions........................................... 19
Fraction Setting............................................... 20
Linear Dimension Calculations........................ 21
Area Calculations.............................................23
Volume Calculations........................................ 27
Board Feet/Lumber Calculations......................32
Right-Angle Solutions...................................... 34
Hip/Valley Rafters............................................42
Hip/Valley Rafters (Irregular)..........................43
Jack Rafters...................................................... 44
Stair Problems..................................................46
Overflow Indication.........................................49
Accuracy........................................................... 49
Battery and Auto-Shut-Off.............................. 50
Full Reset, All-Clear.........................................50
Appendix A (Area Formulas)............................ 51
Appendix B (Area & Volume Formulas)............ 52
Limited Warranty............................................. 53