EasyManua.ls Logo

CalDigit TS3 - Ethernet; Audio

CalDigit TS3
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Audio
The TS3 has one 3.5mm audio input and one 3.5mm amplied audio output. The audio devices
must be selected in the “Sound” section under “System Preferences. The TS3’s audio device will be
listed as ‘USB audio CODEC’ in your settings.
Ethernet
The TS3 has a single Gigabit Ethernet port to connect to a Gigabit Ethernet network. Your computer
will connect to whichever network is connected to the TS3 by default. These settings can be
changed in the “Network” section under “System Preferences”. The Ethernet port also supports
wake-on-LAN which allows your computer to wake from standby remotely via the network.
*60hz refresh rate through DisplayPort may not be compatible with all 4K displays.
Please visit http://www.caldigit.com/KB/index.asp?KBID=198&viewlocale=1 for more details.
Resolution Video Display Frequency Single Monitor
5K 60 Hz Yes
4K 60 Hz Yes
2K (2560 x 1600) 60 Hz Yes
Full HD (1920 x 1080p) 60 Hz Yes
2K (2560 x 1600) 30 Hz Yes
Full HD (1920 x 1080p) 30 Hz Yes
Resolution Video Display Frequency Dual Monitor
2K (2560 x 1600) 60 Hz Yes
Full HD (1920 x 1080p) 60 Hz Yes
4K 60 Hz* Yes
2K (2560 x 1600) 30 Hz Yes
Full HD (1920 x 1080p) 30 Hz Yes
Single Monitor: Connected to Thunderbolt™ 3 Port (With use of a USB-C Video Adapter connected to the Thunderbolt™ 3 port)
Dual Monitors : Connected to DisplayPort & Thunderbolt™ 3 Port (With use of a USB-C Video Adapter connected to the Thunderbolt™ 3 port)

Related product manuals