7
Connecting the TS3 to your computer
Once the TS3 has been powered on, connect the device using a Thunderbolt™ 3 cable from one
of the Thunderbolt™ 3 port labeled “Computer” on the TS3 to a Thunderbolt™ 3 port on your
computer. This single connection will now provide 85W charging for your laptop in addition to
expanding your connectivity options.
LED Indicator
The TS3 is equipped with an LED indicator, which will display a BLUE light if the unit is powered on
and connected to your computer.
ON OFF
NOTE
Always use the supplied Thunderbolt™ 3 cable or a certied 40Gb/s
Thunderbolt™ 3 cable.
To Next Page
Loading...
