CALEFFI SATK Series User Manual

5
INSTALLER
1. Cut off electricity from heat interface
unit.
2. Use a screwdriver and gently press
on the two lower splines to take off
the device from the back of its xing
template.
3. Insert both ends of the connecting
wire into their proper seat on the
xing template.
Use the proper holes
to install the SATK’S remote control
device directly onto the wall or onto a
housing. The necessary screws are
supplied together with the device.
Pay attention to the sign “UP”.

CALEFFI SATK Series Specifications

General

Brand	CALEFFI
Model	SATK Series
Category	Remote Control
Language	English