29
USER
9 - Weekly heating program
When operation mode WINTER or
HEATING ONLY is selected, the remote
control device allows operation in
AUTOMATIC mode in which a priorly set
program manages the room temperature
during the various times of the day.
The room temperature can be set to
two independent levels: DAY (
) and
NIGHT (
); the weekly heating program
distributes these levels over the day.
Inside the remote control device there is
a standard program to control the room
temperature that can be changed by the
user.
The display / change mode of the
heat
ing program will be actuated by
pressing
key ; the lighting of icon
shows that it is on.
FUNCTION
DISPLAY HEATING
PROGRAM
CHANGE HEATING
PROGRAM
ID ICON
steady
blinking
After making the changes press key
again to exit the programming
area.
To Next Page
Loading...
Need help?
General
