34
USER
10.2 - Change pre-heating program
1. Press key . Icons and 1 will
appear on the display and show the
rst day of the week.
2. Press key
. Icon will light up
on the display and show the pre-
heating program. Icons
(pre-
heating enabled)
or (pre-heating
disabled) and the jumper are ON
or OFF accordingly.
3. Press button
to move to the
program change zone: icon
and the day of the week will blink.
4. Turn button
to select the day you
want.
5. Press button
to conrm the
day you selected and to move to
the time. The day of the week will
stop blinking and the time will start
blinking.
6. Turn button
to select the time you
want.
7. Press key
to change status
ENABLED (
) / DISABLED ( )
assigned to current time.
8. Turn button
until the time period
you want the current level to be kept.
9 Press key
to change level and
so on.
10. Repeat operations from point 3 on to
change the day.
To Next Page
Loading...
Need help?
General
