CALEFFI SATK Series User Manual

35
USER
11 - Fault signalling
The remote control device will display any
faults with code E... blinking in place of the
temperature display.
To learn about the type of fault refer to
the
heat interface unit instruction booklet.
There can be two kinds of faults: those
which can be restored by the user and
those which cannot be restored.
11.1 - Restorable faults
You recognize these faults because
icon
will light up and blink together
with icon RESET;
they can be reset by
pressing key

CALEFFI SATK Series Specifications

General

Brand	CALEFFI
Model	SATK Series
Category	Remote Control
Language	English