CALEFFI SATK Series User Manual

9
INSTALLER
1. Turn button to select the
parameter number to be displayed.
The display will show the
corresponding parameter value.
2. Press button
: to change this
value. The corresponding parameter
value will start blinking.
3. Turn button
to change the
displayed value.
4. If within 30 sec. no key is pressed,
normal operation will be restored
and the last change made will not
be saved.
5. Press button to store the value.
6. To change the parameter repeat
from point 4.
7. To exit the conguration context
press key
.

CALEFFI SATK Series Specifications

General

Brand	CALEFFI
Model	SATK Series
Category	Remote Control
Language	English