EasyManua.ls Logo

Calix GigaSpire BLAST u4hm - Wall Mounting Dimensions and Instructions

Calix GigaSpire BLAST u4hm
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
May, 2023.
Installing the System on a Wall
Dimensions for wall mounting of a GigaSpire GM1028H are included here for reference.
Note: The GM1028H must be wall or pole mounted using the appropriate mounting
bracket.
Wall Mount Dimensions - GM1028H Satellite
The Calix satellite GM1028H can be wall mounted. Keep the following information in mind
when considering wall mounting:
In a wall mount environment, the minimum distance between the u4hm and the ground
is 3.3 meters (11 feet).
Note: Elevation helps APs achieve maximum Wi-Fi coverage per the system
specification. The ideal mounting height above the ground for the u4hm is 3.3 meters (11
feet). Mounting the unit lower than this height is supported, but it may not achieve its
maximum signal reach.
Locate the unit on the wall in a location that is unlikely to be bumped or jostled.
Make sure that the Ethernet cable[s] (if used) and power supply wiring attached to the
unit are secured properly and out of harms way.
Note: Once the GigaSpire is connected and turned up, Wi-Fi network parameters are
persisted in memory. For this reason, if power is lost to the unit, it will be re-discovered
on the network automatically, without operator intervention.

Related product manuals