Proprietary Information: Not for use or disclosure except by written agreement with Calix.
May, 2023.
Appendix A
Appendix
System LED Behavior
EXOS EDGE system LED behavior is defined below.
Startup LED Behavior
LEDs on the front surface of the unit provide information on the status and current state of
the device. Below, you will find a detailed status of the power-up cycle.
Note: Based on the model being deployed, LED size and/or orientation may be different
(however behavior is unchanged).
Status Function Color
Off
Power is off.
The unit has not been turned on, or
There is no power to the unit
Booting Up,
Software Upgrade
in Process
Unit is in the boot-up process or
service/software is being upgraded. Flashes
orange every second assuming software has
taken over.
Note: LED is on.
Boot-up Failure
Boot-up failed (assuming software has taken
over)
Note: LED is on. Cycles at 8/10 of a second
Connected to
Internet
Unit has successfully booted up, local services
are up and connected to the Internet.
Service Failure,
No service, no Internet.
Note: LED is on. Cycles at 1.6 seconds
To Next Page
Loading...
