Calix GigaSpire BLAST u4hm - System Specifications

43
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
May, 2023.
System Specifications
Hardware specifications for the GM1028H system follow:
Dimensions
Value
Width
10.75 in (27.3 cm)
Height
10.75 in (27.3 cm); 10.9 (27.7 cm) with cable boot
Depth
3.65 in (9.27 cm)
Weight
4.6 lbs. (2.1 kg)
Powering and Alarms
Value
AC / DC
Ext. Power Adapter (10 ft/6 ft): 12 VDC, 3A
2-pin barrel connector (DC) to 3-pin (AC)
Input voltage: 12 VDC (nominal), 10 VDC (min.), 15 VDC (max)
Power over Ethernet (PoE)
PoE 802.3bt PD
Network Interfaces
Value
WAN
Single 1GE port; supports PoE 802.3bt PD
LAN
Single 1GE port (100/1000/2500 Base-T) port, RJ-45
PoE 802.3bt PD
Wireless
Dual band internal antennas
(2x2 2.4 GHz, 2x2 5 GHz simultaneous)
 2.4 GHz 802.11 b/g/n/ac/ax
 5 GHz 802.11 a/n/ac/ax
 2x2 UL/DL MU-MIMO, Explicit high-power, dynamic
beamforming
Environmental
Value
Operating temperature
Operating and storage relative
humidity
K.21 enhanced lightning support
Indoor ambient temperature: -20 ° C* to 60 ° C (-4° F to 140° F)
10 to 90% and 5 to 95% non-condensing respectively
*If the system is deployed in environments with temperatures
below -30° C, Calix recommends first starting the system in a
warmer environment and run for 10-15 minutes. Once running,
the system can function in temperatures down to -40° C / -40°F.
Certification and Compliance
Value
Emissions
FCC Part 15 Class B, Industry Canada (IC),
ICES-003 Class B, CISPR-22
Safety
UL 62368 and UL 1697 approved