17
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Verifying Services
Follow local practices to connect to each active service port in the ONT to confirm service
activation.
Connect to each active phone jack to verify telephone numbers and services. Verify that
the TEL1 or TEL2 LED lights flashing green when a line is off-hook.
If Ethernet service is included in this installation, confirm that data is being received and
transmitted normally. The LAN1 or LAN2 or LAN3 or LAN4 LED will be flashed
during data transmission.
If WLAN service is included in this installation, confirm that data is being received and
transmitted on WLAN interface. Verify the WLAN LED is green when the WLAN is
connected.
To Next Page
Loading...