Callaway LS User Manual

CALLAWAY LS LASER RANGEFINDER MANUAL
While looking through the Eye
Piece, PRESS & RELEASE the
Power Button. The rangender
is now powered on.
1.
FOR MORE SUPPORT VISIT: www.callawaytag.com/product-support
HOW TO USE
To focus/increase clarity, use
the Diopter Adjustment by
turning the Eye Piece.
2.
Continue looking through the Eye
Piece, aim the Zero-In Aiming Square
at your intended target & PRESS the
Power Button. The laser will re and
the Laser Indicator Box will appear
around the Zero-In Aiming Square.
The measurement will be displayed at
the top of the LCD display.
3.
164Y
RANGEFINDER DIAGRAM
LCD DISPLAY
A. Zero-In Aiming Square
B. Laser Indicator Box
C. P.A.T. Mode Indicator
D. Pulse Indicator
E. Distance
F. Unit of Measure
G. Low Battery
H. Slope Adjusted Distance
164
Y
A. Eye Piece
B. Diopter
Adjustment
C. Power Button
D. Mode Button
E. Battery Door

Callaway LS Specifications

General

Brand	Callaway
Model	LS
Category	Measuring Instruments
Language	English

Summary

How to Use the Laser Rangefinder

Powering On the Device

Press and release the Power Button while looking through the Eye Piece to turn on the rangefinder.

Adjusting Focus and Clarity

Turn the Eye Piece to adjust the Diopter for sharper focus and clarity.

Aiming and Taking Measurements

Aim the Zero-In Aiming Square at the target and press the Power Button to fire the laser.

Measurement Modes

Standard Mode

Recommended for measuring distances to larger objects. Provides standard distance readings.

P.A.T. Mode with Pulse Technology

Best for flagsticks; provides vibration feedback when locked onto the pin.

Scanning Mode

Measures distances to multiple targets in succession by continuously firing the laser.

Slope Measurement On/Off

Enables or disables slope measurement and adjusted yardage display.

Changing Unit of Measure

Switch between Yards and Meters by holding the Mode Button for specific durations.