Calspas patio plus - Connecting Audio Devices; Connecting via Bluetooth

2017 Portable Spa
LTR20171001, Rev. C
Cleaning and Maintenance
www.calspas.com
47
Maintenance Schedule
Each time you rell the spa Follow the section “Filling and Powering Up Your Portable Spa” on
page 12.
Prior to each use Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
Once a week Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
If your water source is high in calcium, add stain and scale preventer.
Once a month Deep clean your spa’s lter. (Follow lter cleaning instruction at
beginning of this section)
Every two to four months Change the spa water. How often you change the water depends
on how much you use the spa. When you change the water, you
will need to:
• Clean and polish the acrylic surface (see page 45)
• Clean and treat the spa cover and pillows (see page 45)
• Deep clean the lter (see page 44)
• Rell your spa (see page 12)
Once a year Replace lter cartridges if the pleats appear frayed.
If you use the Cal Pure UV water sanitizer, you will need to replace
the UV lamp (see page 46 for UV lamp maintenance)