12/28
In addition to the safety regulations described in this section, please take not of all the
information provided in the manual of the lifting device onto which the pallet forks frame has
to be mounted.
Failure to comply with the basic safety norms or precautions may lead to accidents during
operation, maintenance or repair of the equipment.
It is often possible to avoid accidents by recognizing potentially dangerous situations before
they occur. The operations must be aware of potential dangers and possess the training,
competence and the equipment necessary to correctly carry out the work.
CAM attachments cannot under any circumstances be held responsible for accidents or
damage resulting from the use of the equipment by inadequately trained personnel or if
inappropriate use has been made of the same, as well as the, even partial, non-observance of
the safety norms and the intervention procedures contained in the present manual and in that
of the lifting device.
CAM attachments cannot envisage each possible circumstance that may result in danger.
Therefore the warnings given in this publication and which appear on the equipment are not
exhaustive.
In the event that equipment, procedures, work methods or working techniques are used that
are not specifically advised by the CAM attachments company, it is necessary to make sure
that there is no danger to the operator or other people.
To Next Page
Loading...
Need help?
General
