22/28
8. TROUBLESHOOTING
N° Problem Cause Action
1 The pallet forks
frame no longer fits
the machine
Damage to the pallet forks frame Replace the pallet forks frame by a new
one
The hooks don’t fit between the guide
lugs on the quick-coupling system
Make sure that the hooks fall between the
guide lugs on the quick-coupling system
2 The clearance
between the quick-
coupling system
and the pallet forks
frame is too big
Damage to the pallet forks frame Replace the pallet forks frame by a new
one
The hooks don’t fit between the guide
lugs on the quick-coupling system
Make sure that the hooks fall between the
guide lugs on the quick-coupling system
3 It is not possible to
reattach the pins to
the quick-coupling
frame
Dirt between the pins and the quick-
coupling frame
Remove the dirt between the pins and
the quick-coupling frame
If none of these troubleshooting suggestions or solutions were helpful, please contact your local
dealer or the manufacturer.
To Next Page
Loading...
