20/28
7. MAINTENANCE
7.1. Safety instructions for the maintenance of the product
• For maintenance, place the pallet forks frame in its lowest position to the ground. Switch off
the vehicle’s engine and remove the key.
• Use tools and equipment suited to the work to be undertaken.
• Do not leave any tools or equipment behind on any part of the machine.
• The operator should wear safety shoes and gloves when using or maintaining the pallet
forks frame.
• Before maintaining the pallet forks frame, carefully read the instructions in the manual of
your lifting device.
• Make sure you read the operating manual before carrying out maintenance.
• This manual contains all the necessary information on the installation and operation of the
pallet forks frame.
• Some of the maintenance operations should only be carried out by professional technicians.
If you require this information and the maintenance steps, please contact your dealer.
7.2. Maintenance schedule
Task 2H D W M 6M Y
1. Daily maintenance check
2. Cleaning
2H: every 2 hours, D: daily, W: weekly, M: monthly, 6M: every 6 months, Y: yearly
7.3. Maintenance instructions
In the event of problems or if operations are to be undertaken that are not specifically
described in this manual, consult CAM attachments or the retailer.
1. Daily maintenance check
A daily check of the pallet forks frame can limit wear to a minimum.
• Make sure that the instruction manual is complete, legible and available for reference.
• Check the entire machine for damage, corrosion or cracks in structural components before each
use.
Can be done by the user.
To Next Page
