18/28
6. OPERATION
6.1. Safety instructions for operating the product
• Define and demarcate the working area and make sure that everyone stays sufficiently clear
of the pallet forks frame working area at all times.
• The pallet forks frame must remain horizontal and centred.
• Only operate the pallet forks frame from the operator’s seat and make sure you have a
complete overview of the work activities.
• Be aware of overhead clearances and obstacles.
• Never stand or work under the pallet forks frame to prevent third parties from being hit by
falling objects during work.
• Sharp braking is prohibited with a load on the pallet forks frame.
• Do not exceed the maximum speed of 20 mph. Adjust your speed according to the terrain.
• A damaged and malfunctioning machine must never be used. If damage or malfunctions
are discovered during pre-operation inspection or function tests, the machine must be
tagged and removed from service.
• The lifting device may only be driven by qualified drivers who have also been trained in the
operation of a lifting device fitted with the equipment.
• Check all the parts of the equipment for rust, cracks or other damage before each use.
• Only use the equipment if it is in perfect condition.
• Only use the equipment in aisles and gangways that are wide enough for the necessary
manoeuvres to be made while driving or handling the load.
• If you use the equipment outdoor, never do so in high winds as the forklift could tip over.
• Check the correct installation before you put the pallet forks frame into use.
• Never lift or transport an unlocked attachment.
• Do not use if there is a risk of unexpected movement, only use the vehicle on solid ground.
• Only operate in sufficiently illuminated areas.
• When the machine is not in use, avoid unexpected movement by ensuring the machine is
in a stable position.
• Do not leave the truck unguarded without lowering the load to the ground, applying the
handbrake and switching off the engine first.
• Do not wear loose clothing or belts, cuffs, large sleeves, scarves, shirts or anything else that
may get caught in the moving parts.
• For safety reasons, arbitrary adaptations or modifications to the equipment are prohibited.
• In the event of non-envisaged workmanship or intervention or following a procedure
different to that indicated in the manual, consult CAM attachments before proceeding in
order to ascertain its feasibility.
• Transportation of non-permitted materials is forbidden.
• Not intended for use in areas at risk of explosion and fire.
• Do not lift loads on inclines and gradients.
• Make sure the load cannot move or fall.
• Before using the pallet forks frame, carefully read the instructions in the manual of your
lifting device.
• Only use the pallet forks frame in open and free spaces.
• Under no circumstances may the values on the type decal be exceeded. Observe the
capacity limits on the type decal.
To Next Page
