EasyManuals Logo

Cambridge Audio AXR100D User Manual

Cambridge Audio AXR100D
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
Troubleshooting
Last updated: July 29, 2022 10:31. Revision #5467
THERE IS NO POWER
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
Check the power is on at the front of the unit.
THERE IS NO SOUND
Check the correct input source is selected on the front panel.
Check that the speakers are connected correctly.
If using the tuner, check aerial connections and an available station is selected.
Check the unit is not in mute mode.
Check the Speaker A/B configuration matches your speakers.
THE SOUND IS DISTORTED
Check aerial connections and placements.
Check speaker connections.
Check that an appropriate source is connected to the selected input. (I.e. no line level source connected to the phono input.)
THERE IS A HUM COMING FROM THE SPEAKER
Ensure that all cable connections are secure, particularly ground/shield connections for turntables.
THERE IS UNWANTED BACKGROUND NOISE AND INTERFERENCE
Move the unit away from other electrical equipment that is likely to cause interference.
Re-orientate the aerial.
Ensure that all cable connections are secure, particularly ground/shield connections for turntables.
THE REMOTE HANDSET WILL NOT FUNCTION
Check that the batteries have not expired.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cambridge Audio AXR100D and is the answer not in the manual?

Cambridge Audio AXR100D Specifications

General IconGeneral
Frequency Response5Hz - 50kHz
Digital Inputs1 x optical, 1 x coaxial, 1 x USB
Outputs1 x pre-out, 1 x 6.35mm headphone, 1 x subwoofer
BluetoothYes (aptX HD)
Dimensions430 x 151 x 340mm (W x H x D)
Weight10.5kg
DAB/DAB+ BandBand III (174-240 MHz)
FM Band87.5-108 MHz
Standby Power Consumption<0.5W
Input Impedance (MM)47k Ohms
DAC Resolution24-bit/192kHz
Power Output100W per channel (8 ohms)
Total Harmonic Distortion<0.01%
Inputs1 x MM phono, 1 x 3.5mm aux
TunerDAB/DAB+
Input Impedance47k Ohms
Bluetooth Version4.2
Analogue Inputs3 x RCA, 1 x MM Phono, 1 x 3.5mm Aux
USB InputYes (for firmware updates)
Analog Inputs1 x 3.5mm aux

Related product manuals