To Next PageTo Next Page
Need help?Do you have a question about the Cambridge Audio Evo and is the answer not in the manual?
General| Brand | Cambridge Audio |
|---|---|
| Model | Evo |
| Category | Turntable |
| Language | English |
Describes the front panel display.
Button for skipping tracks.
Button for controlling playback.
Selects audio output for speakers.
Rotary knob for volume and source selection.
Accesses playback information and product details.
Infrared receiver for remote control.
Powers the unit on or puts it into standby.
Connection for headphones.
Displays album artwork or source icon.
Shows current track information.
Displays streaming sample rate or bitrate.
Indicates the currently selected source.
Visualizes current track progression.
Shows elapsed track time.
Displays the current time.
Indicates network connectivity status.
Shows selected speaker output.
Indicates if volume is muted.
Notifies about available firmware updates.
Shows MQA decoding status.
Control playback modes.
Connects the power cable.
Connects loudspeakers (Speaker A).
Dedicated connection for Evo CD player.
Connects to a TV for audio return.
Connects to PC/Mac computers.
Adjusts audio ground for noise reduction.
Connects local media storage devices.
Wired network connection.
Outputs power state signals.
Receives power state signals or IR commands.
For custom install control.
Connects digital audio sources.
Connects analogue audio sources.
Connects a turntable with an MM cartridge.
Output for a subwoofer.
Output for power amplifiers.
Connects the power cable.
Connects loudspeakers (Speaker A).
Dedicated connection for Evo CD player.
Connects to a TV for audio return.
Adjusts audio ground for noise reduction.
Connects local media storage devices.
Wired network connection.
Receives IR commands.
Connects digital audio sources.
Connects analogue audio sources.
Output for a subwoofer.
Mutes or unmutes audio output.
Powers the unit on or puts it into standby.
Stores and recalls source presets.
Selects audio output for speakers.
Displays playback information or product details.
Adjusts display brightness.
Ejects a CD from the player.
Stops CD playback.
Controls track playback.
Selects the audio source.
Adjusts audio volume.
Illustrates basic audio connections to loudspeakers.
Instructions for using an Ethernet cable.
Instructions for Wi-Fi setup.
Steps to configure the StreamMagic app and player.
Using the player with Google Home.
Steps to pair a Bluetooth device.
Instructions for AirPlay setup with Apple devices.
Using Control Center for AirPlay audio.
Steps to pair a Bluetooth device for audio output.
Procedure to send audio to Bluetooth devices.
Procedure to stop sending audio to Bluetooth devices.
Sets the player's name for network services.
Sets the player's name for AirPlay.
Configures the player's standby behavior.
Sets the inactivity timeout for standby.
Adjusts the front panel display brightness.
Configures USB audio connection class.
Adjusts audio equalization settings.
Sets a maximum volume limit for streaming services.
Enables early access to firmware updates.
Checks and applies firmware updates.
Resets the player to factory default settings.
Technical details for the Evo 75 model.
Technical details for the Evo 150 model.
