Need help?Do you have a question about the CAME 806SA-0140 and is the answer not in the manual?
Read instructions, use qualified staff, wear anti-static clothing, use for intended purpose, keep children away.
Product complies with Directive 2014/53/EU. Full EU declaration available at www.came.com.
Properly dispose of packaging and product components for recycling as per local laws.
Wireless gateway/Bluetooth selector for Came operators controllable via Wi-Fi or Bluetooth using a smartphone app.
Lists and describes all components of the CAME Wireless Gateway and its connectors.
Provides the physical dimensions of the device and illustrates connection types to control boards.
Crucial safety steps before connecting: cut power, remove batteries, check device status after power-on.
Instructions on how to switch between Wireless Gateway and Bluetooth Selector modes using the change mode button.
Details button press durations for mode switching, Wi-Fi parameter reset, and factory settings.
Steps for configuring the device in Wi-Fi mode, including app download and linking compatible operators.
Steps for configuring the device in Bluetooth mode, including downloading the app for smartphone control.
Explains the meaning of the red POWER LED states: start-up, ready, connected, or off.
Details the blue Bluetooth LED states: deactivated, detection in progress, not detected, or configured.
Explains the green Wi-Fi LED states: deactivated, connecting, connected, or WPS activated.
Indicates that a sequential flashing of all LEDs signifies the device firmware is being updated.
Lists key technical specifications including type, power supply, protection rating, operating temperature, and frequencies.
To Next Page
General
