Pag. 9 - - 02/2021 - © CAME S.p.A.
General precautions
• Read the instructions for use.
• Read the instructions carefully before beginning the installation and carry
out the procedures as specified by the manufacturer.
• Installation, programming, commissioning and maintenance must only
be carried out by qualified, expert staff and in full compliance with the
applicable law. • Wear anti-static clothing and footwear if performing
work on the circuit board. • Only use this product for its intended purpose.
Any other use is hazardous. • The manufacturer cannot be held liable for
any damage caused by improper, unreasonable or erroneous use. • Also
check the warnings in the installation and use manuals for the operator the
product is associated with. • In order to avoid accidental contact with live
parts, reposition the external operator casing after connecting the product.
• When using the product, do not allow people, including children, to go
near the operator or the manoeuvring area. • Do not use the product in
adverse weather conditions. • The manufacturer CAME S.p.A. declares that
the product described in this manual complies with Directive 2014/53/EU.
- The full EU declaration of conformity is available at the following address:
www.came.com.
DECOMMISSIONING AND DISPOSAL - The packaging materials (cardboard,
plastic, etc.) should be disposed of as solid urban waste. The product
components (metals, control boards, batteries, etc.) must be separated from
other waste for recycling. Check your local laws for information on how to
dispose of these materials.
DISPOSE OF THE PRODUCT RESPONSIBLY.
The contents of this manual may be changed at any time and without notice.
The measurements, unless otherwise stated, are in millimetres.
The illustrations in this manual are merely indicative.
ENGLISH
To Next Page
Loading...
Need help?
General
