12 04/2014
© 09/2010 © CAME cancelli automatici s.p.a. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.a. to notify said changes.
ITALIANITALIAN
ENGLISH
- For positioning the plate with respect to the rack, see and follow the instructions in the drawing.
Fill the wooden form with concrete and wait at least 24 hrs for it to solidify.
- Remove the wooden frame, use earth to fi ll the pit around the cement block.
- Unscrew the washers and nuts from the bolts. The anchoring plate must be free of any debris, perfectly level and with the bolt threads
completely emerged from the surface.
Insert the electrical cables into the tubes until they protrude by about 400 mm .
To Next Page
Loading...
