CAME BX243C User Manual

BX243C and BX243R
VEHICULAR SLIDE GATE OPERATOR
INSTALLATION MANUAL
Your model may look different than the model illustrated in this manual.
THIS PRODUCT IS TO BE INSTALLED AND
SERVICED BY A TRAINED GATE SYSTEMS
TECHNICIAN ONLY.
Visit www.liftmaster.com to locate a
professional installing dealer in your
area.
This model is for use on vehicular passage gates
ONLY and not intended for use on pedestrian
passage gates.
This model is intended for use in Class I
vehicular slide gate applications.

CAME BX243C Specifications

General

Brand	CAME
Model	BX243C
Category	Gate Opener
Language	English

Summary

UL325 Model Classifications and Entrapment Protection Requirements

UL325 Entrapment Protection Requirements

Details entrapment protection requirements for UL325 gate operator classes.

Safety Installation Information

General Safety Requirements

Required Entrapment Protection Devices

Contact Sensors (Edge Sensors)

Explains the use and placement of contact edge sensors for safety.

Non-Contact Sensors

Details the function and use of non-contact sensors like photoelectric eyes.

Important Safety Information

Preventing Serious Injury or Death

Crucial safety precautions for operating and maintaining the gate operator.

Fire and Electrocution Protection

Safety measures to prevent fire and electrocution hazards.

Install Operator (Model BX243C) - Part 1

Prepare Operator Cover and Plugs

Route Electrical Wires

Install Operator (Model BX243C) - Part 2

Position and Level Operator

Secure Operator and Covers

Install Operator (Model BX243R)

Release Operator and Rest Rack

Weld Rack and Adjust Position

Manual Release and Limit Adjustment

Manual Release Procedure

How to manually release the gate operator using the key and lever.

Adjusting Open and Close Limits

Steps to set the open and close limit positions using cams.

Electronic Card Overview

Terminal Descriptions

Identifies and describes the various terminals on the electronic card.

Power Wiring and Entrapment Devices

Power Wiring Connections

Instructions for connecting the main power supply to the operator.

Photoelectric Sensor Wiring

Diagrams for wiring photoelectric sensors for different safety functions.

Entrapment Protection Devices Wiring

Edge Sensor Wiring

Wiring instructions for two-wire normally open edge sensors.

Functionality Switches

Switch Settings and Functions

Detailed guide to the functionality switches and their effects.

Test Photoelectric Sensors

Safety Test Procedure

Steps to electrically connect and activate the photoelectric sensor test.

Sensor Functionality Check

Save Operational Settings

Run and Register Gate Cycles

Save Adjustments using PROG Button

Procedure to save settings using functionality switch 6 and the PROG button.

Install and Program Radio Card

Install Security+ 2.0TM Radio Card

Program Remote Controls

Process for programming remote controls to the radio card.

Maintenance Schedule

Monthly Maintenance Checks

Semi-Annual Maintenance Checks

Troubleshooting Common Issues

Gate Not Opening or Closing

Potential causes and remedies for a gate that fails to operate.

Gate Opens But Won't Close

Troubleshooting for when the gate opens but does not close.

Gate Closes But Won't Open

Diagnosing issues when the gate closes but fails to open.

Manufacturer's 3-Year Limited Warranty

Warranty Verification and Conditions

Warranty Exclusions and Limitations