EasyManua.ls Logo

CAME BX608ALS

CAME BX608ALS
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Sliding-gate operators
BX604AGS BX608AGS BX608ALS
INSTALLATION MANUAL
FA01413-EN
EN
English
RU
Русский
Polski
PL
Question and Answer IconNeed help?

Do you have a question about the CAME BX608ALS and is the answer not in the manual?

CAME BX608ALS Specifications

General IconGeneral
BrandCAME
ModelBX608ALS
CategoryGate Opener
LanguageEnglish

Summary

General Precautions for Installers

Important Safety Instructions

Crucial safety warnings and advice for installers to prevent harm during installation.

Dangers and Disposal

Identified Dangers

Highlights risks like entrapment, trapping hands/feet, and transit hazards.

Control Board Details

Control Board Functions and Connections

Describes the functions of the control board, its terminal boards, and connections.

Technical Data and Specifications

Usage Limitations and Technical Data

Details model-specific usage limits, electrical/mechanical data, and operating conditions.

Installation - Foundation and Preparation

Installation - Anchoring Plate Securing

Installation - Operator Setup

Installation - Rack Attachment

Fastening the Gate Rack

Instructions on how to secure the rack to the gate, including assembly of modules.

Installation - Operator Mounting and Adjustment

Pinion-Rack Coupling Adjustment

How to adjust the operator's height for optimal pinion-rack engagement.

Installation - Limit Switches

Setting Travel End Points

Procedure for installing and adjusting mechanical limit switches to define gate travel limits.

Electrical Connections and Power Supply

Main Power Connection

Instructions for safely connecting the system to the mains power supply.

Control and Safety Device Wiring

Photocell Safety Device Setup

Wiring instructions for Delta photocells, including standard and safety test connections.

System Programming - Basics

Initial Programming Setup

Steps to power up the system and begin the initial programming sequence.

System Programming - Functions

Input Configuration (CXCY) and Safety Tests

Assigning functions to CX/CY inputs and testing safety devices.

System Programming - Timing and Data

Automatic Closure and Timing Settings

Configuring automatic closure, partial opening times, and pre-flashing beacon.

System Programming - Users and Settings

Error Codes and Final Checks

Error Message Interpretation

Lists and explains common error codes encountered during operation.

Related product manuals