Need help?Do you have a question about the CAME BXL04AGS and is the answer not in the manual?
General| Motor Power/Voltage | 24 V DC |
|---|---|
| Max Gate Weight | 400 kg |
| Operating Temperature | -20°C to +55°C |
| Max. Gate Leaf Weight | 400 kg |
| Duty cycle | 30% |
| Protection class/Rating | IP44 |
| Power Supply | 230 V AC (50/60 Hz) |
| Safety Devices | Obstacle detection, Photocells |
Essential safety instructions and warnings for all installation personnel.
Key features, description, intended use, limitations, and technical data.
Gate operator dimensions and a diagram of the standard installation setup.
Parts identification, installation guidelines, preliminary checks, and necessary tools.
Details on required cable types and minimum cross-sectional areas for connections.
Steps for laying corrugated tubes and installing the anchoring plate for the operator.
Procedure for setting up the gearmotor and fastening the rack securely.
Setting the limit switch points and securing the gearmotor to the base plate.
Guide to electrical connections, fuses, and control board components for the operator.
Connecting the gearmotor, encoder, endstops, and signaling devices to the control board.
Connecting command, control devices, and safety inputs like photocells.
Overview of how to program functions using DIP switches and the P1 key.
Programming functions like automatic closing, self-learning, and stop operations.
Configuring advanced features, service tests, and maneuver speed adjustments.
Saving transmitter settings, managing users, and resetting system parameters.
Adjusting trimmer settings and interpreting alert LED indicators for diagnostics.
Performing final operations and resolving common issues with the gate operator.
To Next Page
