CAME C-BX Installation Manual

Page 23 - Manual FA01734-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Troubleshooting
PROBLEMS POSSIBLE CAUSES CHECKS AND REMEDIES
The operator
neither opens nor
closes
There is no power supply
The gearmotor is released
The transmitter’s battery is run down
The transmitter is broken
The stop button is stuck or broken
The open/close button or key selector is stuck
Check the power supply
Call the assistance service
Replace the batteries
Call the assistance service
Call the assistance service
Call the assistance service
The operator opens
but won’t close
The photocells are engaged
The sensitive edge is engaged
Check the cleanliness and proper working
state of the photocells
The operator
closes but won’t
open
The sensitive edge is engaged
Call the assistance service
The flashing light
doesn’t work
The light bulb is burned out
Call the assistance service
Periodic maintenance log to be used by the user (every 6 months)
Date Notes Signature
Extraordinary maintenance
The following table is for logging extraordinary maintenance, repair and improvement actions performed by specialised, external firms.
Extraordinary maintenance actions must by carried out by skilled technicians.
Exrtraordinary maintenance log
Installer’s stamp Operator’s name
Date of intervention
Technician’s signature
Requesting party’s signature
Job done _______________________________________________________________________________________________
______________________________________________________________________________________________________
______________________________________________________________________________________________________

CAME C-BX Specifications

General

Brand	CAME
Model	C-BX
Category	Door Opening System
Language	English