2)
3)
A
B
1)
Pag.
15 -
Manual code
:
119 G30 55 ver.
1.0 10/2009
© CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Note: set up the single arms to be
assembled along the corresponding rotor
frame. Refer to the reinforcement triangle
or to the distance between the upper disc
and the fi rst of the arms.
Assemble the rotor arms, join and secure the single arms to the side with bolts and to the reinforcing triangle with the washers, nuts
and bolts using the issued T-driver.
Finally, insert the caps using a plastic or wooden mallet and striking them on their perimeter so as not to damage them. (see
drawings)
Cap
Hexagonal, T-iron.
UNI1751 Ø10 washer
UNI5587 M10 nur
Reinforcing triangle
Reinforcing triangle
UNI5933
M8x20
screws
Intelligent Security & Fire Ltd.
To Next Page
Loading...
