Page 24 - Manual FA01639-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Programming the AUTOMATIC DOOR RELEASE function*
*For internal receivers with AUTOMATIC DOOR RELEASE function only
This function is used to open the entrance automatically when there is a call from the entry panel. No communication is
activated and the call ends automatically.
Enabling the function allows the user to activate/deactivate it as required. The function is enabled by default.
> 5s
Program the function when associating the internal receiver.
Press and hold the button for more than 5 seconds to enable or
disable the function.
If the LED remains on, the function is enabled.
If the LED fl ashes, the function is disabled.
End the call and repeat programming for all of the other internal receivers.
To Next Page
Loading...
Need help?
General
