CAME TH/124 - Adjusting Temperature Differential

R
h
P
C
24
20
30
32
34
36
C
C
24
20
30
32
34
36
C
C
24
20
C
24
20
R
h
P
C
24
20
30
32
34
36
C
C
24
20
30
32
34
36
C
C
24
20
C
24
20
A
B
ON ON
OFF
1 h
p. 14 - Manual FB00802-EN v. 1- 07/2017 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.
Note. By pressing button the temperature dierential is restored to the (± 0.2 °C) factory
settings.
Press button
until the desired
temperature difference value is
reached between ± 0.1 °C and ±
0.9 °C). After about 10 seconds
or by pressing again button
the display will show the time and
room temperature.
Press button
twice 󱭇.
The display will show, for 10
seconds, the value of the set tem
-
perature dierential (0.2°C)
Change the value of the temperature dierential
The factory settings have a ± 0.2°C temperature dierential. This temperature dierential
is suitable for high thermal-inertia systems, such as, systems with cast iron radiators.
Time
Set-point
Set-point
- dierence
Set-point
+ dierence
Temperature
If you need to change that value,
proceed in the following way:
X2