CAME v6000 - Micro Switch Relocation

󱵪
󱵭
p.
10
10 - Manual
FA00047-EN
FA00047-EN v.
2
2- 07/2016 - © Came S.p.A. - The contents of this manual may be changed, at any time, and without notice.
Fitting the operator to the guide
Fit the adapter to the drive shaft.
The operator can be fi tted onto the guide: either in standard position 󱵪 or at a right angle 󱵭.
⚠ If the operator is to be fi tted at a right angle, before installing it, set the micro-switch (see the correspon-
ding paragraph).
Guide
Drive shaft with adapter
Self-drilling 6 x 15 screw
U-shaped brace
Micro
Self-drilling 6 x 15 screw
U-shaped brace
Guide
Drive shaft with adapter
Micro