Why does my CAME Garage Door Opener invert travel direction at the limit switch?
If the CAME Garage Door Opener inverts the travel direction at the limit switch, check the proper direction of the door travel, eliminate all mechanical friction and check the door balancing.
What to do if my CAME Garage Door Opener opens but won't close?
If your CAME Garage Door Opener opens but does not close, it could be due to several reasons. First, check if the N.C. safety contact (2-C1) is open. Also, ensure the door travel direction is correct and verify the balancing of the overhead garage door.
Why doesn't my CAME V1000P automatically close?
If your CAME Garage Door Opener is not performing the automatic closing function, verify that the automatic closing function is active and check the proper direction of the door travel.
How to fix a CAME Garage Door Opener transmitter that is not working?
If your CAME Garage Door Opener transmitter isn't working, try memorizing the transmitter again.
What to do if my CAME Garage Door Opener closes but doesn't open?
If your CAME Garage Door Opener operator closes but does not open, check the balancing of the overhead garage-door.
Why CAME Garage Door Opener opens but doesn't close?
If your CAME Garage Door Opener opens but does not close, check the N.C. safety contact (2-C1) and also check the proper direction of the door travel. You should also check the balancing of the overhead garage-door.
What to do if only one transmitter works with my CAME Garage Door Opener?
If only one transmitter works with your CAME Garage Door Opener, enter (or duplicate) the same code in all the transmitters.
Why does my CAME V1000P Garage Door Opener start too slowly?
If your CAME Garage Door Opener starts too slowly, eliminate all mechanical friction, check the door balancing, and check the tautness of the belt/chain.
What causes my CAME V1000P Garage Door Opener to push weakly or invert travel direction?
If your CAME Garage Door Opener is pushing too weakly or inverting the direction of travel, try these steps: 1. Adjust the sensitivity. 2. Eliminate all mechanical friction. 3. Check the door balancing. 4. Check the tautness of the belt/chain.
What to do if the photocell is not working in CAME Garage Door Opener?
If the photocell is not working on your CAME Garage Door Opener, check proper functioning of the photocell. The N.C. safety contact (2-C1) may be open.
General| Frequency | 433.92 MHz |
|---|---|
| Maximum Thrust | 1000 N |
| Power Supply | 230V AC |
| Safety Features | Obstacle detection |
| Battery Backup | No |
Outlines critical checks and preparations required before commencing the installation process.
Details the process of fitting the brace to the transmission guide.
Explains how to correctly position the traction guide for different door types.
Steps to prepare the operator and programming device for configuration.
Guides the user through setting the upper travel limit for the door.
Guides the user through setting the lower travel limit for the door.
To Next Page
