Need help?Do you have a question about the CAME BXV Series and is the answer not in the manual?
General| Encoder | Yes |
|---|---|
| Power Supply | 230V AC, 50Hz |
| Max Door Weight | 800kg |
| Duty Cycle | 30% |
| Lifting Capacity | 800kg |
| Power Consumption | 370W |
| Remote Control | Yes |
| Battery Backup | Optional |
Crucial safety guidelines for proper installation to prevent harm.
Highlights key safety risks and entrapment points to avoid during operation.
Steps to prepare the site, including digging holes and setting up tubes.
Instructions for correctly positioning and securing the anchoring plate.
Details on how to attach the rack to the gate and secure the operator.
Steps for casting cement and removing the foundation frame after drying.
Guidance on placing the operator onto the anchoring plate and managing cables.
Procedures for welding or fastening the rack modules securely to the gate.
Steps to ensure the correct distance between the pinion and rack for smooth operation.
Securing the operator to the anchoring plate using washers and nuts.
Installing and adjusting limit switches for opening and closing positions.
Configuring magnetic limit switches for gate opening and closing detection.
Guidelines for routing electrical cables safely and in compliance with regulations.
Instructions for connecting the operator to the power grid and managing input voltage.
Connecting input devices like stop buttons, control devices, card readers, and keypads.
Connecting photocells and safety edges to ensure safe operation.
Explains the ESC, <>, and ENTER buttons for menu navigation and confirmation.
How to activate F5 to check the operation of connected safety devices.
Configures F9 for gate behavior when an obstacle is detected.
Initiates A3 for the gate's travel self-learning process.
Lists and explains various error codes (E1-E18) encountered during operation.
To Next Page
