To Next PageTo Next Page
Need help?Do you have a question about the CAME FLY Series and is the answer not in the manual?
General| Brand | CAME |
|---|---|
| Model | FLY Series |
| Category | Garage Door Opener |
| Language | English |
Foreword, before installation checks, and general safety precautions.
Installation guidelines, user operation advice, and general safety for operation.
Overview of the automatic swing gate system and its main parts.
Detailed technical data, characteristics table, and component identification.
Steps for removing and installing the transformer and its base.
Aligning the base to the door, motor enclosure, and feeding cables.
Reconnecting the transformer and preparing for electrical connections.
PB1001 arm specifications: dimensions, weight limits, and opening angles.
Guidance on standard/misaligned applications and motor anchorage points.
PB1002 arm specifications: dimensions, weights, and opening angle settings.
Explains opening limits, necessary ground stops, and adjustments.
Specific installation instructions for doors exceeding 2.5 meters.
Installation guidelines for doors under 2.5 meters, including gap requirements.
Identification of plug-in connectors and major components of the ZP10 control panel.
Technical overview of the ZP10 motherboard, including power, safety, and functions.
Details on connecting safety and command devices to the motherboard.
Explanation of functions selectable via dip switches and trimmer adjustments.
Wiring instructions for the control panel's 230V power supply.
Wiring for safety devices and specific functions like antipanic.
Configuration options for the 10-way dip switch, including wind stop and push & go.
Functionality controlled by the 2-way dip switch, such as disabling micro-photocells.
Explains how to adjust motor speed, slowdown, and torque using trimmers.
Step-by-step guide for programming the limit switches for gate operation.
Instructions for wiring two motors in a master-slave configuration.
