Need help?Do you have a question about the CAME BX-74 and is the answer not in the manual?
General| Operating Temperature | -20°C to +55°C |
|---|---|
| Motor Voltage | 230 V AC |
| Power Supply | 230V AC |
| Safety Features | Obstacle detection |
| Remote Control | Yes |
| Manual Operation | Yes |
Introduction to the manual's purpose and guidelines.
Preliminary checks and safety considerations before installation.
Safety precautions during the installation process.
Guidelines for safe operation and use by end-users.
General safety recommendations for working near moving parts.
Explanation of symbols used throughout the manual.
Specifies intended applications and limitations for the automation system.
Lists compliance with ISO and other relevant industry standards.
Description of the electromechanical gearmotor and its housing.
Details specifications for BX-74 and BX-78 models.
Identifies and labels the components of the BX-74/78 assembly.
Provides physical dimensions of the operator unit.
Essential checks for gate stability, alignment, and ground conditions.
Lists necessary tools and materials for installation.
Details cable types and minimum thickness for various connections.
Illustrates the typical layout for gate automation components.
Instructions for preparing and installing the securing plate in a pit.
Procedure for attaching endstop fins to the rack.
Steps for manually disengaging the gearmotor for operation.
Explains the control board's power supply and basic functions.
Identifies key components and terminals on the control board.
Diagrams for connecting the motor, endstops, and encoder.
Details on connecting 24V AC accessories.
Wiring for flashing lights and status indicator lamps.
Connection diagrams for buttons, selectors, and remote controls.
Wiring configurations for safety photocells and sensitive edges.
Configuration options using DIP switches for various gate behaviors.
Adjusting automatic closing time and partial opening settings.
Procedure for setting deceleration points for smooth gate movement.
Changing the behavior of partial stop during opening and closing.
Adjusting the motor's torque output.
Instructions for connecting the radio receiver antenna.
How to insert the AF radiofrequency card into the control board.
Details on compatible AF radio frequency cards.
Steps to program remote control transmitters to the system.
Instructions for synchronizing and controlling two gearmotors with one control board.
Regular checks and cleaning tasks for the end-user.
Lists common malfunctions, causes, and remedies.
Forms for recording professional maintenance, repairs, or improvements.
Guidelines for environmentally responsible disposal of materials and products.
Statement of compliance with relevant EU directives.
To Next Page
