CAME BX-74 - Radio Command - Card and Memorization; Radio Frequency Card Types; Transmitter Memorization

TOP TAM
AF
   
O 1
   
 1 
   
O 1





O
O
1











O
O
1

AF
   
O 1
   
 1 
   
O 1





O
O
1








O
O
1
   
O 1

   
O 1






O
O
1
p.
18
18 - Manual code:
FA00127-EN
FA00127-EN v.
1
- 05/2015 - © Came S.p.A. - The manual's contents may be edited at any time without notice.
Frequency
MHz
Card
Radio-frequency
Series
transmitters
FM 26,995 AF130 TFM
FM 30.900 AF150 TFM
AM 26.995 AF26 TOP
AM 30.900 AF30 TOP
AM 433.92 AF43S / AF43SM TAM / TOP
AM 433.92 AF43TW TWIN (KeyBlock)
AM 433.92 AF43SR ATOMO
AM 40.685 AF40 TOUCH
AM 863.35 AF868 TOP
Only for the AF43S / AF43SM radi-frequency cards.
- position jumper as shown depending on the series of transmitters you are using.
Radio frequency card
- Keep the CH1 button on the electronic card pressed. The led fl ashes.
Memorisation
CH1 = Channel for direct command to a function
of the gearmotor’s card, (“open only/”open-close-
invert” or ”open-stop-close-stop” vommand,
depending on the choice made on DIP switches 2 and
3 󱤨).
- Press the transmitter button you wish to memorise. The LED will stay on to show memorisation has been successful.
- Repeat the procedure for the “CH2” button
associating this to another button on the transmitter.
CH2 = Channel for direct
command to an auxiliary device
connected to B1-B2 or for the
control of two paired motors.
LED flashing
LED on